29/07/2026
TISCO's Nickel-Based Alloys are Making a Strong Mark in the Global Market, Establishing a High-End International Brand
From qualification access to the delivery of N08825, TISCO responded to the "extreme requirements" with "extreme manufacturing".
Read More
24/05/2023
TISCO's Stainless Steel Products Passed PER Certification
42CrMo4 and 4140 refer to the same steel alloy, where 42CrMo4 is the name in the European standard, and 4140 is the name in the AISI/SAE standard. Both are widely used in many applications and can be used interchangeably.
42CrMo4: This is the European (EN) name for the same steel alloy as AISI 4140 steel. In Europe, this alloy is usually known by its EN name "42CrMo4" or the British name BS 708M40.
4140: This is the AISI (American Iron and Steel Institute) designation for chromium-molybdenum steel (AISI 41xx series steel). Specifically, AISI 4140 is a low-alloy steel containing chromium and molybdenum as strengthening agents.
Key points: Chemical composition: 42CrMo4 and 4140 steel have similar chemical compositions, with slight differences depending on specific specifications and standards (such as EN or AISI).
Applications: They are typically used in a variety of applications that require high strength and good toughness, such as the automotive, oil and gas, and mechanical engineering industries.
Equivalent standards: Although they are essentially the same material, they are named differently because they are standardized by different organizations (EN and AISI). Manufacturers and users typically choose a name based on their location and the standards they follow.
42CrMo4 and 4140 are two names for the same alloy steel, differing only in naming conventions according to regional standards. They have similar chemical compositions and mechanical properties, making them interchangeable in many applications across different industries. Their high strength, toughness, and versatility in heat treatment make them indispensable in the manufacture of components that require durability and reliability under harsh conditions.
AISI 4140 is generally considered to be a steel grade that is roughly equivalent to 42CrMo4 (1.7225). Both are chromium-molybdenum (Cr-Mo) series quenched and tempered steels, and their heat treatment process parameters are very similar. However, their chemical composition ranges are not exactly the same. 42CrMo4 has a slightly higher chromium (Cr) and molybdenum (Mo) content and stricter restrictions on impurity content, which gives it better hardenability and superior low-temperature impact performance in large cross-section workpieces.
For general medium-stress parts, the two can be substituted for each other; however, if critical components, large-section parts, or project requirements require compliance with EN (European) standards, formal approval is required. We can provide 4140 steel and its inspection certificate for your review.
304 is suitable for general indoor, freshwater, and low-chloride environments with good cost performance.
316 contains 2–3% molybdenum, offering much better resistance to chloride pitting and crevice corrosion, recommended for coastal, seawater, brine and chlorine sanitizer service.
If welding is required, 304L / 316L low-carbon grades are preferred.
China Steel Market
Empowering small and medium-scale steel purchasing
Hot search words:
China Rebar prices China Wire Rod Prices Welded Steel Pipe Prices